Products categories

MTE Laboratory Impedance Standards

Series of single resistance, capacitance and inductance decadic standards for calibration of ohm meters, RCL meters and multimeters.

  • Traceable, accurate and stable
  • Low time constant
  • Low temperature coefficient

MTE series Laboratory Impedance Standards are designed for use in cal labs as references for calibration of multimeters, ohm meters and RCL meters. Low time constants and dissipation factors make MTE series suitable for use in wide frequency range and low calibration uncertainties and temperature coefficients provide great results for long time.
On request, standards can be equipped with standard gold plated terminals or BNC coaxial connectors in three-terminal, four-terminal or four-pair terminal layout. High resistance standards come with ceramic terminal isolation as standard.

Resistance 100 mΩ - 10 GΩ, 0 - 20 kHz
± 0.005% / year
Capacitance 10 pF - 100 uF, 20 Hz - 20 kHz
± 0.02% / year
Inductance 100 mH - 1 kH, 100 Hz - 20 kHz
simulated by T-network circuit
± 0.05% / year
Datasheets pdf


MTE RP Foil or ceramic resistance standards
Available in decadic values 100 mΩ - 10 GΩ; box types A, Bbnc, Bstd and C
MTE CP Ceramic or Polypropylen capacitance standards
Available in decadic values 10 pF - 100 uF; box types Bbnc and C
MTE LP T-network inductance standards
Available in decadic values 100 mH - 1 kH; box type Bbnc
See datasheet for more details.