M910E Low-cost Electromagnetic Flowmeter
| Electromagnetic flowmeter M-910E is low-cost version of model M-910. It can measure, indicate and store flow and passed through volume data of conductive liquids. Against model M-910 flowmeter M-910E is not equipped with internal datalogger and with keyboard. Control is possible via magnetic pointer and from PC via internal RS-232 interface. Inductive flow meter M-910E is especially suitable to be used in the chemical industry, paper industry, waterworks maintenance, waste-water maintenance etc. In version M-910E EX the flowmeter meets requirements of standards for equipments intended for use in potentially explosive atmospheres according to directive 94/9/EC. Sensor category is II 3G EEx nA II T5/T6. |
Basic features
|
|
Specification
Basic information
| Nominal diameter DN | 10 .. 800 mm |
| Nominal pressure PN | 10, 16, 25 bar |
| Flow rate range | 0,1 to 10 m/s (0.017 to 5027 l/s) |
| Accuracy | 0.5% for range 0.5 to 10 m/s 1.0% for range 0.1 to 0.5 m/s |
| Ambient temperature | -20°C to 60°C |
| Requested electrical conductivity | > 5 µS / cm |
| Liquid temperature | 130°C separate version 70°C compact version |
| Liner material | soft, hard rubber, PTFE |
| Flanges | DIN (EN1092), ANSI (BS16.5), Sanitary (DIN11851 or Tir Clamp), Wafer style |
| Outputs | frequency pulse RS232 current loop 4-20mA |
| Inputs | RS232 / RS485 |
| Electrodes | CrNi steel, hastelloy C276, tantalum |
| Power supply | 230/115V, 50/60Hz, selectable 12V, 24V, 48V, 50/60Hz or DC, as option |
| Protection category | IP 67 (IP68 on request) |
| Power consumption | 9 VA max. |
Accessories
Accessories (included)
| Operation manual | 1 pc |
| Calibration certificate | 1 pc |
| Aplication software | CD ROM / Floppy disk |
| RS232 cable | 1 pc |
